Meeting the most exacting design and industry performance standards to offer a comprehensive range of cable jointing products for a variety of power cables that will minimize outages and ensure long service life.
Used on electrical distribution power cables, medium voltage heat shrink and cold shrink splices from Shawcor Connection Systems group are available to 35 kV, with single and three-conductor splices offered for the electric utility, industrial and oil and gas markets. Our kits are factory-designed and independently tested to IEEE 404 standards.
The CJ series heat shrink joints feature continuously extruded components for stress control, insulation and insulation shield, thus ensuring "cable quality" consistency.
CSJ cold shrink joints feature a geometric stress control system and are offered as a one-piece compact joint design for quick and easy installation.
CJ series joints are single-core, 15 kV to 35 kV, heat shrink joints for XLPE and EPR extruded dielectric, bare and jacketed concentric neutral cables. The CJ 10J series joints use the same joint components as the CJ 10 series joints, but are supplied with a wraparound jacketing sleeve to seal from cable jacket to cable jacket on jacketed concentric neutral cables.
CJ 20 series joints are single-core, 5 kV to 35 kV, heat shrink joints for XLPE and EPR extruded dielectric, metal tape, wire and lead sheath-shielded power cables. The CJ 20 series joints are supplied with all of the hardware required to shield and externally ground the joint without soldering. Most of the joints can be supplied with either a tube or a wraparound sleeve for the outer jacket.
CJ LC series joints are single-core, 15 kV to 35 kV, heat shrink joints for XLPE and EPR extruded dielectric, longitudinally corrugated type LC cables. The joints are supplied with all the hardware required to shield and externally ground the joint without soldering. Dual moisture blocked tinned copper braids with constant force springs make the connection of the LC shield across the joint and to ground. The wraparound jacketing sleeve allows for reduced installation space.
These cold shrink cable joints are available for 1/C, 15 kV XLPE and EPR extruded dielectric, bare and jacketed concentric neutral power cables for the electrical utility market.