Skip to Content
mobile menu
PIPELINE PERFORMANCE shawcor.com

​CJT 80 Series

​Heat shrink medium voltage joints

The CJT 80 series joints are trifurcating transition, heat shrink joints for splicing three conductor 15 kV and 25 kV jacketed or unjacketed paper and lead laminated dielectric cable (PILC or VCLC) to three each, single conductor XLP and EPR extruded dielectric, tape, wire shielded, bare or jacketed concentric neutral cables.

Features and Benefits

  • Fast, consistent installation means lower installed costs
  • No lead wiping required for positive oil stops
  • Installation environment: use of torch adds flexibility to cable preparation in any climate
  • Heat activated seals ensure maximum protection against moisture ingress
  • Reinforced wraparound sleeve with aluminum foil liner provides rugged protection and a moisture vapor barrier
  • Wide cable ranges reduce inventory
  • Pressure tested for continuous operation at 15 psig at 110°C
  • Slim profile allows installation in confined areas

Standards

  • IEEE 404-2000

Tests reports

CJT 80 series joint qualification is based on the testing of the 15 kV trifurcating transition joints where the oil stop was proven, and the dielectric tests in the 15 kV and 25 kV single conductor joint tests respectively, as tested to IEEE 404-2000 at an independent laboratory.

Test reports are available as follows:


  • CJT 1580 series: HVS031104
  • CJ 1580 series: HVS031103
  • CJ 2580 series: HVS040423

Ordering

  • Find the cables voltage class and conductor size(s) to be spliced. Select the kit order number that covers the conductor size range. Confirm the dimensional data; particularly when the conductor size is at the extremes of the range. The overlap in size ranges allows for size transitions when splicing different cable sizes. The determining factors for selection are that the minimum and maximum dimensions for the primary insulation and connector dimensions are met and that the jacket diameter(s) maximums are not exceeded.
  • For size transitions outside the listed range consult the factory.

Product Properties

15 - 25 kV, 3/C Paper-Lead to 3-1/C Poly Cable Joints

  1. OSTC oil stop tube
  2. CCON conductive shielding tube
  3. CCB conductive breakout boot
  4. SCS stress control/oil block sealant
  5. CSCR stress control tube
  6. CFXB insulating tube(s)
  7. CCON conductive shielding tube
  8. Tinned copper mesh and braid
  9. CCB insulating breakout boot
  10. CRDW-RA reinforced wraparound with aluminum foil moisture barrier
Order Number PILC/Poly Conductor Size Insulation Diameter Range Jacket Diameter (Max) Connector Dimensions (Max) Installed Length (Nom)
1/C PILC Range 1/C Poly Range O.D. Both Length
AWG/Kcmil IN IN IN IN IN IN
15 kV, 3/C PILC to 3 - 1/C PILC Trifurcating Joint or 3/C PILC to 3-1/C POLY Cable Transition Joint (165 - 220 mils insulation)
CJT 1581 #4 - 4/0 0.55 - 0.90 0.60 - 1.05 0.80 - 1.85 1.05 4.50 40.0
CJT 1582 4/0 - 350 0.80 - 1.20 0.85 - 1.30 0.90 - 1.85 1.25 5.50 40.0
CJT 1583 400 - 750 1.00 - 1.30 1.05 - 1.60 1.10 - 2.15 1.75 7.00 48.0
CJT 1584 750 - 1000 1.15 - 1.50 1.25 - 1.85 1.10 - 2.15 1.85 8.00 48.0
25 kV, 3/C PILC to 3 - 1/C PILC Trifurcating Joint or 3/C PILC to 3-1/C POLY Cable Transition Joint (260 - 320 mils insulation)
CJT 2581 #1 - 300 0.80 - 1.25 0.85 - 1.25 0.90 - 1.85 1.25 5.50 40.0
CJT 2582 350 - 500 1.00 - 1.45 1.05 - 1.50 1.10 - 2.15 1.60 7.00 48.0
CJT 2583 600 - 1000 1.35 - 1.70 1.40 - 1.90 1.10 - 2.15 1.85 8.00 48.0

Market / Applications

  • Power Distribution
  • Power Distribution - MV
  • Utility

Documentation

Version: 01 2018/JAN/02
SEARCH PRODUCT CATALOG   
Need more information? Click here to contact us directly!
Our Success Stories

Our Success Stories

Discover Shawcor integrated services and advanced technologies being applied to the world’s largest projects in the most extreme and challenging environments. Lookup for any project by Geo-location, Capability, Technology and Service provided.

View more success stories
SEND US A MESSAGE