HD-RTR for Weld Inspection

HD-RTR System for Weld Inspection

Typical Applications

• Pipe Mill seam and double joint stations
• LPG tank construction
• Pipeline Construction Off-Shore & On-shore:
  1. Large Diameter SWSI with orbiting head crawler (photo A)
  2. SWSI with existing crawler (photo B)
  3. DWSI with external CP x-ray (photo C)

Specifications

• Continuously scans welds as single strip
• Inspection width of 74mm
• Scans at up to 48mm/second
• Better than 50 micron pixel resolution
• Field changeable scintillator
• On-board chiller for sensor & electronics
• 40C + ambient continuous operation
• Sealed to IP65 rating
• Rated to 300kV CP X-ray
• 16 Bit digitisation
• Better than 1.3% Wire IQI (>10mm WT)
• Single USB2 Output for up to 2 detectors
• Meets BS EN ISO 17636-2 and API 1104
• Long Detector life: > 100,000m of weld
• Un-cooled version for factory use
• Comprehensive iX-HDRTR Software
• Can drive up to two buggies on weld band

μHDRTR Detector

Features and Benefits

• Continuous scanning of welds at up to 25mm per second
• Suitable for EB, laser and thinner metal sections (<10mm)
• Ultra High Resolution with better than 25μm pixel pitch
• Splits Wire 13 of Duplex at 20% depth
• High contrast image with high signal-noise ratio
• Shielded to 225kV X-rays
• 25mm weld width coverage
• 16 bit digital output via USB2
• Comprehensive ’iX-HDRTR’ software package