Skip to Content
mobile menu


High Build Epoxy coating for High Temperature operating pipelines

The Canusa HBE-HT is a state-of-the-art two component epoxy coating system which has been specifically formulated for high temperature pipelines.

Applied to bare steel, HBE-HT has proven to withstand operating temperatures up to 150°C (302°F) with exceptional performance. HBE-HT is used for protection of pipeline feld joint girth welds, valves and fittings, as a holiday repair material on FBE coated pipe or for rehabilitation projects. This superior, 100% solids, novolac epoxy system can either be spray applied or brush applied to the intended substrate

High Temperature Corrosion Protection

  • HBE-HT coating system was designed to protect operating pipelines up to 150°C with unrivaled performance

Exceeds FBE Performance Requirements

  • HBE-HT exceeds FBE coating performance requirements, including impact resistance, hot water soak adhesion and resistance to cathodic disbonding, as specified in USA (NACE RP0394), British (CW6), and Canadian (CSA Z245.20) test standards

State-of-the-Art Formulation

  • Epoxy Phenol Novolac technology combined with proprietary amine cure chemistry allows the HBE-HT coating to maintain adhesion stability after extended aging in hot water and hot dry air

High Build in Single Coat

  • A single pass application direct-to-metal will achieve a high build coating thickness of 20-40 mils (500-1000 microns)

Variety of Uses

  • Mainline pipelines, rehabilitation projects, girth weld field joints, damage and holiday repair to FBE coated pipe, or pipeline valves, fittings and bends

Product Properties

Performance All performance testing followed CSA-Z245.20-10 unless specified
Service Temp. Up to 150°C (302°F)
Typical Thickness > 20 mils (500 microns)
Mixing Ratio 3:1 (by volume)
Percent Solids 100%
Specific Gravity Base: 1.49 Cure: 1.05
Hardness (ASTM D2240) > 80 Shore D
Adhesion to Steel > 2500 psi
Adhesion to FBE > 2000 psi
Cathodic Disbondment @ 28 days, 23°C < 2 mm
Cathodic Disbondment @ 28 days, 120°C < 10 mm
Cathodic Disbondment @ 28 days, 150°C < 10 mm
Impact Resistance @ -30°C > 1.5 J
Impact Resistance @ -25°C > 3.0 J
Hot Water Immersion @ 28 days, 75°C Rating 1
Hot Water Immersion @ 28 days, 120°C Rating 1
Water Absorption (ASTM D570) < 0.1 %
Chemical Resistance (ASTM D543) Excellent in various pH solutions
Shelf Life 3 years when stored in original packaging between 5°C and 40°C.
Cure Speed1
Brush Grade and Spray Guide Gel Time ≤ 40 minutes
Repair Grade Cure Gel Time ≤ 10 minutes
Typical Kit Size Required by Pipe Diameter2
4.5" - 16" 0.5 Liter Kit
18" - 32" 1.0 Liter Kit
34" - 50" 1.5 Liter Kit

1 Gel times were measured @ 23°C (73°F).

2 Based on 400 mm coating width, 25 mils (635 micron) average thickness and 50% wastage factor.


Handle with care. Before and during use, observe all safety labels on packaging containers, consult with Canusa-CPS Material Safety Data Sheets and abide by all local or national safety regulations.

Applications / Assets

  • Fittings and Bends
  • Gas Pipelines
  • Girth-Weld Joints
  • Oil Pipelines
  • Repair and Rehab


Last Updated: 12/18/2017 3:43:27 PM
Need more information? Click here to contact us directly!
Our Success Stories

Our Success Stories

Discover Shawcor integrated services and advanced technologies being applied to the world’s largest projects in the most extreme and challenging environments. Lookup for any project by Geo-location, Capability, Technology and Service provided.

View more success stories