Skip to Content
mobile menu
PIPELINE PERFORMANCE shawcor.com

INR-110

Corrosion protection and sealing sleeves for pre-insulated pipe joints

Canusa provides high performance, heat shrinkable products designed for the corrosion protection (INR-110) and sealing protection (K-60) of pre-insulated pipe joints.

INR-110 sleeves are specifically engineered for use in combination with polyurethane (PUR) foam or other infill systems. These sleeves are resistant to the conditions associated with the PUR foaming operation and maintain their full set of anti-corrosion properties. INR-110 sleeves are fully compatible with a wide range of pipeline coatings, including PP, FBE, PE, Coal Tar and Tape.

The Canusa Wrapid Sleeve™ Type K-60 is a onepiece wraparound sleeve used to seal and provide mechanical protection of exposed foam insulation. It consists of a cross-linked polyolefin backing, coated with a technologically advanced protective adhesive which effectively bonds to polyethylene outer jackets and foam insulation.

I) Operator Friendliness - One-piece, wraparound sleeves with a factory bonded closures and a specially engineered product thickness results in optimum installation time. Single wrap configuration eliminates the requirements for muiltiple wrappings.

II) Crosslinked Polyolefin Backing - Proprietary crosslinking technology provides superior resistance to PUR in-fill while ensuring longterm hoop stress.

III) Unique adhesive technology allows for a low surface preparation requirement while ensuring long-term adhesion and excellent cathodic disbondment resistance properties.

Product Properties

Adhesive Test Standard Unit INR-110 K-60*
Softening Point ASTM E28 °C (°F) 120 (248) 87 (189)
Lap Shear Strength AIN 30 672 N/cm2 (psi) 6 (9) 35
Backing
Specific Gravity ASTM D792 0.95 0.93
Tensile Strength ASTM D638 MPa (psi) 22(3190) 20
Elongation ASTM D638% % 600 600
Hardness ASTM D2240 Shore D 52 46
Heat Shock - 4hrs @ 250°C ASTM D2671 Visual pass pass
Abrasion Resistance ASTM D1044 mg 30 45
Sleeve
Peel Strength DIN 30 672 N/cm (pli) 18 (10) 88
Water Absorption ASTM D570 % 0.05 0.05
Low Temperature Flexibility ASTM D2671 °C (°F) -30 (-22) -20 (-4)
Resistance to PUR in-fill - Pass/Fail Pass N/A
Drum Skin Test D024 A P50-F SD004 Visual no melt or sag N/A

Applications / Assets

  • Gas Pipelines
  • Oil Pipelines
  • Pre-insulated pipe

Documentation

Last Updated: 1/31/2018 9:06:00 PM
SEARCH PRODUCT CATALOG   
Need more information?
Our Success Stories

Our Success Stories

Discover Shawcor integrated services and advanced technologies being applied to the world’s largest projects in the most extreme and challenging environments. Lookup for any project by Geo-location, Capability, Technology and Service provided.

View more success stories
SEND US A MESSAGE